First, the use of bamboo furniture board methods, matters needing attention:
- 1. Please check whether the bamboo furniture board is structurally intact before use.
- 2. If the single-layer bamboo furniture board is combined with other material sheets, please clean and level the substrate material combined with the bamboo furniture board to ensure that there are basically no impurities, no greasy substances, and so on. The composite surface of the substrate must be completely flat and free of irregularities. If the substrate is a wood material, please ensure that the moisture content of the material is close to the moisture content of the bamboo furniture board, so as to avoid damage to the furniture board due to a large amount of moisture absorption expansion or a large loss of water shrinkage after the composite with the furniture board.
- 3. This bamboo furniture board can be compounded with various materials in the case of using suitable adhesives. Please carefully select the adhesive and learn more about the variety, performance and use of the adhesive to the adhesive distributor.
- 4. Evenly apply the adhesive to ensure that the adhesive surface of the adhesive covers the entire composite surface, and no blank can be left.
- 5. Before the curing of the adhesive, the bamboo furniture board is compounded with the substrate, and the surface of the board is pressed flat by pressure to extrude excess adhesive and bubbles inside.
- 6. If the whole multi-layer bamboo furniture board is directly used as a furniture panel and other furniture accessories, please grasp the width dimension of the bamboo furniture board. The too wide board is prone to the deformation of the arch, so for a larger area of the whole board Application We recommend the use of bamboo furniture panels with cross-section structure.
- 7. Due to the straight fiber characteristics of bamboo, when cutting and eye-catching the bamboo furniture board, it is necessary to use a fast-saw, saw-toothed and thin electric saw and a fast-speed electric drill, which cannot be used with a large sawtooth saw and directly The nails are nailed to the bamboo furniture board.
Second, the use of bamboo veneer / bamboo skin method, matters needing attention:
- 1. Please check whether the veneer/bamboo skin is structurally intact before use, and whether the non-woven fabric backing is detached or foamed.
- 2. Please clean and level the substrate material combined with the veneer/bamboo skin to ensure that there are basically no impurities, no greasy substances, etc. The composite surface of the substrate must be completely flat and free of irregularities. If the substrate is a wood material, please ensure that the moisture content of the material is close to the moisture content of the bamboo veneer/bamboo skin, so as to avoid the large amount of hygroscopic expansion of the substrate after the veneer compounding or the large water loss shrinkage to damage the veneer.
- 3. This bamboo veneer/bamboo skin can be compounded with various materials in the case of using suitable adhesives. Please carefully select the adhesive and learn more about the variety, performance and use of the adhesive to the adhesive distributor. method.
- 4. Evenly apply the adhesive to ensure that the adhesive surface of the adhesive covers the entire composite surface, and no blank can be left.
- 5. Before the adhesive is cured, the bamboo veneer/bamboo skin is leveled and compounded with the substrate, and flattened with a soft roll, a small wooden scraper, etc., and the excess adhesive and the bubbles inside are extruded.